Download File T.vst59.031_1366x768_general.rar Review

Format a USB flash drive to FAT32 and copy the .bin file into the root directory (not inside any folder). Update the Board: Insert the USB drive into the TV board's USB port.

Do not turn off the power until the LED stops flashing or starts blinking very rapidly. Download File T.VST59.031_1366x768_General.rar

If the screen looks distorted after the update, you may need to enter the Service Menu (usually by pressing Menu + 1147 ) to adjust the LVDS map or panel configuration. Format a USB flash drive to FAT32 and copy the

Connect the power cord to the board. The status LED should begin flashing, indicating the update is in progress. If the screen looks distorted after the update,

To update the firmware using a USB drive, follow these general steps:

If the update stops around 19%, it often means the software on the board is already the same version as the one on the USB drive. Flashing T.VST59.031 LCD controller board firmware