Download Tcl | Led40d2939 Firmware Part2 Rar

Copy the extracted firmware file (usually named V8-xxxxxx.bin or MstarUpgrade.bin ) directly to the root directory of the USB—do not put it inside a folder. : Turn off the TV and unplug the power cord. Insert the USB drive into the TV's USB port. Press and hold the Power button on the TV (not the remote).

are often hosted on community forums rather than the official TCL Support page, ensure you have both parts before attempting extraction. Download and Extract :

Place both part1.rar and part2.rar in the same folder on your computer. Download TCL LED40D2939 Firmware part2 rar

Wait for the progress bar to reach 100%. The TV will usually restart automatically.

: If you only have part2.rar , the extraction will fail. You must locate part1.rar from the same source to successfully rebuild the firmware file. Copy the extracted firmware file (usually named V8-xxxxxx

Use a USB drive (ideally 8GB or smaller) formatted to .

Right-click part1.rar and select "Extract Here" using a tool like WinRAR or 7-Zip. This will automatically pull data from part2 to create the full firmware file. : Press and hold the Power button on the TV (not the remote)

While holding the button, plug the TV back in. Keep holding until the "Software Upgrading" screen appears.